|
ARC-102 Range of products
The products of this series
are used as scale inhibitors, corrosion inhibitors and dispersants in cooling
water treatment. This page will provide you information on following codes of
products
ARC-1021,
1022,1024,1025,1026,1027
An Ideal Solution to Scale / Corrosion Problems
Cooling
water problems are
SCALE: - Minerals such as calcium and magnesium are relatively
insoluble in water and can precipitate out of the water to form scale deposits
when exposed to common conditions found in cooling water
system.
CORROSION: - Common metals used in cooling systems, such as mild
steel, involves removing oxygen from the cooling water systems, which provides
an ideal environment for the reversion of the metal to oxide state. This
reversion process is called corrosion.
Effects of these problems
If left untreated or left uncontrolled, it can cause :-
- Increased
maintenance cost.
-
Reduced heat transfer efficiency and therefore greater energy losses.
(For example, 1/8" of scale can
reduce the efficiency of a cooling tower heat exchanger by 40%.)
- Possible
production cutbacks or shutdowns.
SOLUTION
Treat with chemicals designed to
prevent scale and corrosion
Limit the
concentration of scale forming minerals by controlled cycle of concentration.
The choice of particular
method of water conditioning depends upon the chemical composition of water so
its advisable to handover your system to a professional water treatment service
provider.
Our Products
ARC-102 range of chemicals offer comprehensive and
result-oriented treatment in order to control these problems consequently &
users can achieve the maximum result from the Cooling Systems.
Characteristics of ARC-102 based
inhibitor are.
--- High Calcium Tolerance
--- Inhibits All of Calcium Scale
--- Hydrolytically Stable, i.e., It Doesn’t Break Down, Hence Doesn’t Loose
Inhibiting Properties
--- Environmentally Acceptable
--- Stable in Most Concentrations of Acids & Alkalis
--- Contains No Halogen, Phosphorus, Silica or Heavy Metal
Most formulated scale control chemicals are
carefully selected blends of chemicals designed to control specific mineral
scales. It should be kept in mind that the objective of Scale Inhibitor is to
keep the heat transfer tubes clean regardless of mechanism. Inhibitors for
calcium phosphate and calcium sulfate are recent development. These new
products, mostly polymeric in nature, make best possible scale prevention of any
kind in comparison to conventional scale preventive chemicals.
Product Characteristics of
various products falling under this ranger are:
ARC-1021 is based upon a combination of organic
phosphate, polyphosphate and special corrosion inhibitors. It increases
solubility of calcium and magnesium salts in the water and prevent it from
precipitating on heat exchanger surface. It interferes in the process of
formation of crystals of scale forming salt. The scale formed by such crystal is
very weak, fluffy and normally are washed off by water velocity.
ARC-1022 is based upon a combination of organic
phosphate, polyphosphate and special corrosion inhibitors. It increases
solubility of calcium and magnesium salts in the water and prevent it from
precipitating on heat exchanger surface. It interferes in the process of
formation of crystals of scale forming salt. The scale formed by such crystal is
very weak, fluffy and normally are washed off by water velocity.
ARC-1024 is a combination of organic phosphate, low
molecular weight polymer and corrosion inhibitor. The powerful dispersant
blended in the product also prevents fouling due to silt and suspended
particles. It is also capable of preventing troublesome calcium phosphate and
calcium scale along with calcium carbonate.
ARC-1025 is a combination of organic phosphate, low
molecular weight polymer and corrosion inhibitor. The powerful dispersant
blended in the product also prevents fouling due to silt and suspended
particles. It is also capable of preventing troublesome calcium phosphate and
calcium scale along with calcium carbonate.
ARC-1026 is a combination of low molecular weight
polymer along with corrosion inhibitor. Low molecular weight water-soluble
polymers are very effective anti-precipitants and prevent all type of scale
formation, under wide range of pH and alkalinity fluctuation. They have very
high calcium tolerance power.
ARC-1027 is a combination of low molecular weight
polymer along with corrosion inhibitor. Low molecular weight water-soluble
polymers are very effective anti-precipitants and prevent all type of scale
formation, under wide range of pH and alkalinity fluctuation. They have very
high calcium tolerance power.
Dosage & Feeding
The type of Cooling Tower, quality of water and
other relevant factors determines dosage. ALBATROSS will provide technical
assistance and will suggest particular product, its dosage, in accordance with
your plant operating conditions and quality of water.
|
