ARC-CW 1090

ARC-CW 1090

ARC-CW-1090 is a dry source of chlorine for use in industrial re-circulating water cooling towers, air washers & evaporative condensers. ARC-CW-1090 contains the active ingredient (90% as chlorine) and is an excellent choice where use of chlorine is desirable along with non-oxidising biocides.


• Cost effective and stable source of chlorine
• Easy to handle. ship, store and apply
• Save expensive cost of dosing equipment
• No white turbidity (as in case of bleaching powder).
• Long duration of sterilizing effect
• Stable in storage - long shelf life
• Saves your Time & money on the labor costs.
• The long-term application can keep your cooling tower clear and free from any algae or Bacteria.


Industrial water pretreatment, oxidizing micro biocide for cooling water systems


50 kgs Plastic drum

The endeavour of our company is to improve quality of products constantly, hence we reserve the right to alter or change specification without prior notice. Liability - NIL unless we have direct control on application.

ARC-1042 XL – Inhibitor For Hydrochloric Acid

Pikling Inhibitors




Completely controls the acid attack on metal.
Gives a uniform finish to metal surface.
Removes the scales along with dirt and greasy matter during cleaning.
Reduces the evolution of fumes during pickling to an extent.
Controls the hydrogen pick-up by metal during pickling.
Suitable for high temperature.
Reduces the acid consumption of pickling bath by 20 to 40%.


ARC-104 XL range of Acid inhibitors are especially designed for various acids for pickling & Industrial cleaning. Its function is to inhibit the acid attack on metal during pickling & cleaning operations.

ALBATROSS’S special inhibitors are formulated from ISI Brand Chemicals. During pickling Nascent Hydrogen is liberated which can pierce the metal & thus weaken it. The unique feature of ARC range of inhibitors is that it converts the nascent hydrogen gas and does not allow it to remain in nascent form hence there is no attack on metal and the metal retains its strength.


ARC–104 XL range of chemicals are all acidic in nature, stable at all temperatures & highly soluble in water.
ARC-104 XL range is equally effective on mild steel, stainless steel, copper, brass etc. It provides excellent protection at various concentration of acids and at different temperatures.


ALBATROSS will provide total technical assistance in arriving at optimum dosage for your operating conditions, besides ALBATROSS provides reference chart for the correct dosing.

ARC-1020 XL – Corrosion Inhibitor For Potable Water (Works Very Well In Hot Water System)

Red Water Treatment

ARC-1020 XL



An Ideal Solution to Brown Water Problems


Guest Complaints of Brown colored water in hotels guest room


– Hygiene levels of your Hotel questioned.
– Hotel reputation at stake
– A dissatisfied customer is often a non-returning customer

Cause: Corrosion

  • Rust particles accumulate and change the appearance of water to Brownish in color.

Corrosion : Some Facts

  • Iron in its natural state is an oxidized compound i.e. Fe2O3, Fe3O4. However, when processed into iron pipe, it becomes elemental iron FeO.
  • Iron Corrodes in presence of water and oxygen whereby, the elemental iron, FeO reverts back to its natural oxidized state, where it came from.

The Corrosion Process

  • Metallic loss occurs from that part of the metal pipe called the anodic area (anode). In this case, iron (Fe0) is lost to the water solution and becomes oxidized to Fe++ ion.
  • As a result of the formation of Fe++, two electrons are released to flow through the steel to the cathodic area (cathode).
  • Oxygen (O2) in the water solution moves to the cathode to form hydroxyl ions (OH-) at the surface of the metal. In the absence of oxygen, hydrogen ion (H+) participates in the reaction at the cathode instead of oxygen.

Types of corrosion Uniform corrosion

  • It is an electrochemical process whereby polyelectrodes are formed on the surface.
  • Any one particular site on the metal surface can become anodic one instant and cathodic the next.
  • Because anodic sites shift or creep about the surface, the rate of loss of metal is relatively uniform over the metal surface.

Conventional Approach:

–Wait till situation is really bad and then replace water pipeline
–High Cost.
–Lost Revenue for rooms under rectification.
–Disturbance to existing guests.
–Cycle repeats – problems will re-occur.


Albatross ARC-1020 XL

*ARC-1020 XL an additive that is dosed into water system at very minute levels.
*ARC-1020 XL is adsorbed onto metal pipe surfaces at anodic areas.
*A thin monomolecular film on the interior of the pipe is created.
*The coating acts as a barrier between water and metal and corrosion is inhibited.

Albatross ARC-1020 XL Working Mechanism

  • Microscopic and x-ray examination of the film formed at the metal surface show two layers, with most of the ARC-1020 XL in the surface layer adjacent to the water.
  • The protective film is an electrical insulator and blocks the electrochemical reactions of corrosion, yet it is thin enough that it does not obstruct water flow.
  • When the hydrous metal oxide film has been covered with a ARC-1020 XL film, ARC-1020 XL deposition stops. The film does not build on itself, and therefore will not form excessive scale.
  • When ARC-1020 XL is introduced into a water distribution system as solution, it is carried by flowing water to all parts of the distribution system.
  • When ARC-1020 XL treatment is first started, the system near the point of application is coated immediately; then the film continues to form at greater distances.
  • Eventually, with continued feeding and sufficient water flow rate, the treatment becomes effective throughout the entire system.
  • Once the film has been created, the protection is maintained as long as treatment is continued; if stopped, the protection is gradually lost. If damaged, the film is self healing, as long as the ARC-1020 XL feed is continued.

Albatross ARC-1020 XL : The Proven Effectiveness

• Testing has been done to show the effectiveness of ARC-1020 XL treatment.
• Testing method
1. Monitoring levels of dissolved metals (e.g., Fe, Cu, Pb) in water samples before and after treatment.
2. Conducting coupon testing based on ATSM Test Method D-2688,“Corrosivity of Water in the Absence of Heat Transfer.”

• Results
ARC-1020 XL effectively protected metal such as lead, copper, cast Iron and ferrous metal, steel, galvanized iron, bronze, red brass, yellow brass and nickel alloys

Albatross ARC-1020 XL : The safety

• Testing was done by SGS Laboratory, one of the top food testing laboratory in the world.
• Test was done by dozing 100 ppm of Albatross ARC-1020 XL into Spritzer Brand Mineral Water.
• Test Certificate show that after adding 100 ppm of ARC-1020 XL, the water quality is still within the permissible limits of Malaysia Food Regulations 1985.

Albatross ARC-1020 XL : The comfort

• With ARC-1020 XL there will be no mess and hassle
• Absolutely easy to store, easy to handle and easy to apply
• All that is needed is a tank and a dosing pump

Albatross ARC-1020 XL : Ideal Solution to Brown Water Problems

– Proven effectiveness
– Safe – Zero Hazard
– Well Tested by independent labs
– Easy to Implement
– Economical

ARC-FA 105 – Fuel Additive

Fuel Additive

ARC-FA 105 Fuel Additive



ARC-FA 105 is used as Fuel Additive for improvement in dispersions and atomization. This product has a unique function of bringing down the problems related to water content, sludge formation, asphaltenes and wax.


It is recommended that ARC-FA 105 treatment products to be fed to the main fuel tank / day fuel tank.


ARC-FA 105 is an excellent slag modifiers, deposit modifiers and are designed to raise the melting point of the oxides and slag formations thus resulting in less sticky deposits with a reduced tendency to adhere to walls and tubes.


1) Gamma Sodium Vanadyl vanadate (5Na2O.V2O4V2O5), which has a melting point of approximately 1070 0F (577 0C).
2) Vanadium Pentoxide (V2O5), having melting point of approximately 12450F (6740C).
3) Sodium Pyrovanadate (2Na2O V2O5), having melting point of approximately 1150 0F (621 0C).
4) Sodium Metavanadate (Na2O.V2O5) having a melting point of approximately 1165 0F (6290C).


Dosage requirements are dependent on nature of dirt, sludge and debris matter. Our Technical Services Representative will provide suitable dosage requirements after thorough surveys of the system operation.


30 ltrs. HDPE Carboys.


These products may cause severe eye and skin irritation. Harmful if swallowed. Avoid eye and skin contact. Wear eye protection and rubber gloves at all times when handling these products. Store in a cool dry place away from strong oxidizing agents.

ARC-1030 XL – R. O. Antiscalent

RO Scale Inhibitor

ARC-1030 XL

Scale Inhibitor For RO Membrane



The production of drinking water by distillation and membrane processes creates usual water treatment problems, such as thermal heat transfer surface and membrane scaling. Our products reduce scaling and improve heat transfer to ensure the production of high quality product water.

Most membranes used today are tubes composed of cellulose acetate or polyamides. Membranes allow flow of water, but hold back dissolved solids. As water passes along the membrane surface, salts such as calcium carbonates, calcium sulfate, and barium sulfate tend to deposit on the membrane.

The use of sulfuric acid has been the traditional way of preventing calcium carbonate scaling. However, sulfuric acid is hazardous to handle, increases sulfate content and adds to corrosivity of water. Albatross provides antiscalants that inhibit calcium scale formation, and improve efficiency of RO Systems.


ARC–1030 XL is unique compositions incorporate acrylic, meleic, non-ionic, and sulfonated monomers in addition to proprietary polymerization technologies to achieve adequate performance for targeted applications.

ARC–1030 XL is a liquid antiscalant controls inorganic scale, colloids, lignins and cellulosic material in RO feed waters.

ARC–1030 XL its unique performance characteristic provide users with more complete control over system feed waters, reducing membrane fouling tendencies and minimizing membrane cleaning requirements.

ARC–1030 XL is compatible with all membrane types and system components, ensuring product reliability.

ARC–1030 XL maintains performance integrity at extreme pH and temperatures and is stable in the presence of multivalent ions such as iron.

ARC–1030 XL will not cause biological growth in tanks, piping or the RO.

ARC–1030 XL is typically dosed into feed waters at the rate of 2-8 ppm.

ARC–1030 XL has excellent solubility and stability


Appearance : Clear

Colour : Colorless to pale yellow

Odor : Mild


The type of membrane, quality of water and other relevant factors determines dosage. ALBATROSS will provide technical assistance and will suggest particular product, its dosage, in accordance with your plant operating conditions and quality of water.


Avoid contact with skin, eyes & cloths. In case of contact- wash with plenty of water.


35 & 50 Ltrs. HDPE Containers.