ARC-DS 1014 pH BOOSTER
Alkalinity Builder ARC-DS 1014 pH BOOSTER FOR A VARIETY OF WATER SYSTEMS DESCRIPTION: ARC-DS 1014 is a concentrated liquid blend of alkaline materials designed for use in systems containing waters of low pH and low hardness. Primary application to acidic influent water will stabilize pH within the proper […]
ARC-DS 1013 Dispersant For Normal Conditions
Scale Preventive for Boiler Albatross ARC-101 Range ARC-1011, 1012, 1013, 1015 Used as Scale Preventive & Sludge Conditioner in boiler An Ideal Solution to prevent Scaling Problems in Boiler PROBLEM SCALE Scale is an extremely hard substance created when mineral salts come out of solution as […]
ARC-1012 (XL) Scale Preventive & Sludge Conditioner
Albatross ARC-101 XL Range ARC-1011 XL, 1012 XL, 1013 XL, 1015 XL Used as Scale Preventive & Sludge Conditioner in boiler An Ideal Solution to prevent Scaling Problems in Boiler PROBLEM SCALE Scale is an extremely hard substance created when mineral salts come out of solution as […]
ARC-DS 1011 Scale Preventive & Sludge Conditioner
Albatross ARC-101 XL Range ARC-1011 XL, 1012 XL, 1013 XL, 1015 XL Used as Scale Preventive & Sludge Conditioner in boiler An Ideal Solution to prevent Scaling Problems in Boiler PROBLEM SCALE Scale is an extremely hard substance created when mineral salts come out of solution as […]
Boiler Type
CARRYOVER CONTROL TYPES OF CARRYOVER Carryover is caused by two mechanisms, priming and foaming. Priming is the sudden violent eruption of boiler water, which is carried along with steam out of the Boiler, usually caused by mechanical conditions. One of the major causes is a sudden increase in the steam […]
Combined Heat transfer process
In most of the engineering applications, however, heat is transferred in successive steps by similar or different mechanisms. For instance, let us consider the case of heating of water in a tube laid in a heat exchanger (or cooling of hot fluid in shell by CW). The water will receive […]
Introduction
Heat is the thermal energy transit from one system to another. The thermal energy can originate from any kind of energy according to the first law of thermodynamics. Transfer of heat is due to unique property of matter, temperature, and is governed by second law of thermodynamics, which dictates that […]
Heat Transfer in Cooling Tower
Two kind of heat transfer occur within the tower between warm water and air. Latent heat of vaporization: Some of the liquid changes to vapor with the absorption of heat. This energy, called the latent heat of vaporization, is that necessary to overcome the attractive forces between molecules in the […]
Variable affecting performance of CT Heat transfer – Cooling Tower
The rate at which heat is transferred in a cooling tower depends upon four factors: the area of the water surface in contact with air; the relative velocity of air and water; the time of contact between air and water; the difference between the wet bulb temperature of the inlet […]
Heat transfer within cooling system (heat exchanger)
The process represented in the above figure (1.1) is one in which hot fluid is cooled by water, which itself heated without any loss of exchanged heat. Industrial heat exchangers consist of a number of tubes enclose in a shell. Exchangers with cooling water in the tubes, and hot product […]